Reliable HVAC Services in Philadelphia, PA
P & J HVAC Philadelphia is a local heating and cooling contractor working out of Center City at 1132 Market Street. We repair, install and maintain air conditioning, furnaces, heat pumps, ductless mini-splits and ductwork for homes and commercial properties across the city. Whether the AC has stopped cooling in July, the furnace is blowing cold air in January, or a system is old enough that replacement is worth discussing, our technicians diagnose the problem, explain what they find in plain language and let you decide how to proceed. Call us or send a service request and we will arrange a visit.
Based in Philadelphia
Our address is 1132 Market Street in Center City, and Philadelphia is the market we work in every day — not a territory covered from two counties away.
Heating and cooling
One contractor for both seasons. Air conditioning in summer, furnaces and heat pumps in winter, and the ductwork and thermostats that tie them together.
Repair, installation, maintenance
Diagnostics and repairs, full system replacements, and seasonal tune-ups. Reviewers mention that our crews clean up the work site when the job is finished.
Explained without jargon
Technicians walk you through what failed, what it will take to fix it and what the alternatives are, so the decision stays yours.
Seven days a week
Open Monday to Saturday from 7 AM to 8 PM and Sunday from 8 AM to 8 PM, so service calls do not have to wait for a weekday morning.
Your local HVAC service partner in Philadelphia
P & J HVAC Philadelphia is an HVAC contractor serving Philadelphia and the surrounding metro area. We work on the equipment that keeps a property liveable through a Philadelphia year: central air conditioning that has to hold up through humid July afternoons, gas furnaces and boilers that carry a house through February, heat pumps that do both, and the mini-splits that go into rooms conventional ductwork never reached.
Most of our work falls into three categories. The first is repair — a system that has stopped, is running badly, or is making a noise it did not make last week. The second is installation and replacement, either because a system has reached the end of its service life or because a property is being renovated or extended. The third is maintenance, which is the least dramatic of the three and the one that quietly prevents the other two.
The way we handle a call matters as much as the wrench work. A technician arrives, listens to what the system has been doing, inspects it, and then explains the findings in ordinary language — what is wrong, what caused it, what the repair involves, and where a repair stops making sense compared with replacement. You get the information and the options; the decision is yours. Reviewers have specifically noted two things about our crews: that they explain systems clearly rather than hiding behind technical vocabulary, and that they leave the job site clean, taking packaging and debris with them at the end of the day.
Heating and cooling equipment is easy to ignore until the moment it stops. When it does stop, the property becomes uncomfortable quickly, and in a Philadelphia winter that can matter for more than comfort. Our aim is straightforward: get the system working properly, keep you informed while we do it, and give you a realistic picture of what to expect from it going forward.
Complete HVAC services in Philadelphia
We cover the full range of residential and commercial heating and cooling work: air conditioning repair and installation, furnace service, heat pump systems, ductless mini-splits, ductwork, thermostats, indoor air quality equipment and seasonal maintenance. Some calls are a single failed component and a same-visit fix. Others are a full system replacement planned over several conversations. Either way the sequence is the same — inspect the system, identify the actual cause rather than the obvious symptom, explain the options with their costs and trade-offs, and carry out the work you approve. Hover or tap any service below to see what it includes.
Air conditioning services
Repair, installation, replacement and maintenance for central air conditioning and ductless systems.
Hover for detailsAir conditioning
- AC repair and diagnostics
- New AC installation
- System replacement
- Seasonal AC maintenance
- Central air systems
- Ductless cooling
Heating services
Heating repair, installation, replacement and maintenance for furnaces, boilers and heat pumps.
Hover for detailsHeating
- Heating repair
- Heating installation
- System replacement
- Pre-season maintenance
- Thermostat issues
Furnace services
Furnace repair, installation, replacement and annual servicing for Philadelphia homes and businesses.
Hover for detailsFurnace
- Furnace repair
- Furnace installation
- Furnace replacement
- Annual furnace maintenance
- Ignition and blower faults
Heat pump services
Heat pumps heat and cool from one system. We repair, install, replace and maintain them.
Hover for detailsHeat pumps
- Heat pump repair
- Installation and replacement
- Defrost and reversing faults
- Seasonal maintenance
- Heating and cooling in one unit
Ductless mini-split services
Room-by-room heating and cooling where running ductwork is impractical.
Hover for detailsDuctless mini-splits
- Mini-split installation
- Repair and diagnostics
- Replacement of failed units
- Filter and coil maintenance
- Multi-zone setups
HVAC maintenance
Seasonal inspections and tune-ups for cooling and heating equipment.
Hover for detailsMaintenance
- Spring cooling tune-ups
- Autumn heating tune-ups
- Full system inspection
- Filter and airflow checks
- Performance testing
Indoor air quality
Filtration, humidity control and ventilation equipment that works with your HVAC system.
Hover for detailsIndoor air quality
- Air filtration upgrades
- Air purification equipment
- Humidifiers and dehumidifiers
- Ventilation and airflow
- Duct condition checks
Commercial HVAC services
Heating and cooling service for offices, retail units and other commercial properties.
Hover for detailsCommercial HVAC
- Commercial repair calls
- Installation and replacement
- Preventive maintenance
- Rooftop and split systems
- Property manager support
Ductwork & thermostats
Duct installation and repair, plus thermostat replacement and programming.
Hover for detailsDuctwork & controls
- Ductwork installation
- Duct repair and sealing
- Airflow balancing
- Thermostat installation
- Programming and setup
Air conditioning services in Philadelphia
Philadelphia summers are humid as well as hot, which puts a particular kind of load on an air conditioner. The system is not only lowering the temperature, it is pulling moisture out of the air, and a unit that is undersized, dirty or low on refrigerant will struggle with the second job long before it visibly fails at the first. That is why a house can feel clammy at 74 degrees and comfortable at 76 — and why “it’s still blowing cold, it’s just not keeping up” is one of the most common calls we take in July.
We repair, install, replace and maintain both central air conditioning and ductless systems. On a repair call the technician starts with what you have noticed and works back to the cause. The complaint is usually one of a handful: the air coming out is not cold, the unit runs constantly without reaching the thermostat setting, it turns on and off every few minutes, airflow from the vents has dropped, there is water pooling near the indoor unit, or the outdoor unit has started making a noise — a rattle, a grinding, a hum that will not go away, or a screech on startup.
Each of those symptoms has several possible causes, which is exactly why guesswork is expensive. Weak cooling might be a clogged filter, a dirty condenser coil, a failing capacitor, a refrigerant leak, or a thermostat that is reading the room incorrectly. Water around the indoor unit is usually a blocked condensate drain, but it can also be a frozen evaporator coil that has begun to thaw. A system short-cycling could be an electrical fault or could be an oversized unit that was never right for the property. The technician measures rather than assumes, then tells you which it is.
A word on the things not to attempt yourself: anything involving refrigerant, sealed electrical components or the disconnect at the outdoor unit should be left to a technician. Refrigerant is regulated and handling it requires certification and equipment, and capacitors hold a charge even after the power is cut. Changing a filter and clearing leaves away from the outdoor unit is homeowner territory. Everything past that is a service call.
For installation and replacement, sizing is the decision that everything else follows from. A unit that is too large cools the room fast, shuts off before it has dehumidified, and leaves the space cold and damp. We look at the property, the existing ductwork and how the space is actually used before recommending equipment.
- AC repair — diagnostics for weak cooling, leaks, noise and electrical faults
- AC installation — sizing, fitting and commissioning of new systems
- AC maintenance — spring tune-ups before the first hot week
- Ductless systems — cooling for rooms without ductwork
Heating services for Philadelphia homes & businesses
Heating season in Philadelphia runs long, and the equipment in the city varies enormously. A 1920s row home in South Philly may still be on a boiler with cast-iron radiators. A converted property in Fishtown might have a high-efficiency gas furnace feeding ductwork that was added later. A newer build could be running entirely on a heat pump. We service all three, along with the thermostats and controls that sit on top of them.
Heating repair calls tend to arrive in a cluster on the first genuinely cold night of the year, and the pattern is consistent: the system worked in March, sat untouched for seven months, and did not come back cleanly. The complaints we hear most often are no heat at all, heat that is noticeably weaker than last winter, some rooms warm while others stay cold, a burner that lights and then shuts down after a couple of minutes, banging or rumbling from the unit, or a thermostat that has stopped talking to the system.
Uneven heating deserves a note of its own because it is so often misdiagnosed. When one bedroom never gets warm, the instinct is to blame the boiler or furnace, but the cause is frequently downstream — a closed or blocked damper, a duct run that has come apart in a crawlspace, an air-locked radiator, or a return path that was never adequate. Replacing the heating plant does not fix a distribution problem, and we would rather tell you that before you spend the money.
Anything involving gas is a stop-work item for a homeowner. If you smell gas, leave the property and call the gas utility first. Pilot lights, gas valves, heat exchangers and flue connections are technician work, and a cracked heat exchanger in particular is a safety issue rather than a comfort one.
The best time to deal with heating is before you need it. An autumn service visit catches the worn igniter, the failing blower motor and the blocked flue while the weather is still mild and parts are still easy to get — rather than at 9 PM on the coldest night in January, which is when those components generally choose to fail.
- Heating repair for furnaces, boilers and heat pumps
- Heating installation and replacement
- Seasonal heating maintenance before the cold sets in
- Thermostat replacement, wiring and programming
Professional furnace services in Philadelphia
Gas furnaces do most of the heating work in this city, and they are generally reliable until a single component gives out and stops the whole sequence. We repair, install, replace and maintain them.
The symptoms have a fairly predictable set of causes. A furnace that will not start at all is often an igniter, a flame sensor, a safety switch that has tripped, or simply no call for heat reaching the board. A furnace blowing cold air usually means the burner is not firing while the blower runs, or the unit is in a lockout after failed ignition attempts. Strange sounds are diagnostic in themselves: a squeal points at the blower assembly, a boom on startup points at delayed ignition, and a rattle is often a panel or duct connection rather than the furnace itself. Poor airflow starts with the filter and then moves to the blower and the ducts. Short cycling — firing and shutting down repeatedly — can be a dirty flame sensor, an overheating limit switch, or restricted return air.
On repair versus replacement, we look at four things: the age of the unit, what this repair costs relative to a new system, how many repairs it has needed recently, and whether the fault is a wear item or a structural failure. A blower motor on a nine-year-old furnace is usually worth fixing. A cracked heat exchanger on a twenty-year-old unit generally is not, and that one is a safety call rather than an economic one. We give you the numbers and the reasoning, not a verdict.
Heat pump services in Philadelphia
A heat pump is one piece of equipment doing two jobs. In summer it moves heat out of the building like an air conditioner; in winter it reverses and moves heat in from the outside air. That makes it efficient, and it also makes it a system where a single fault can affect both seasons — which is why heat pump problems are worth diagnosing properly rather than waiting out.
We repair, install, replace and maintain heat pump systems. Common complaints include heating that feels weak compared with a furnace (sometimes normal, since heat pump supply air is cooler by design, and sometimes not), cooling that has fallen off, the outdoor unit icing over and not clearing, a system that runs almost continuously, unusual sounds from the reversing valve, poor airflow at the registers, and a thermostat that is calling for the wrong mode. Auxiliary or emergency heat running when it should not is another one worth catching early, because it shows up on the utility bill long before it shows up as discomfort.
Heat pumps reward maintenance more than most equipment because they run year round. Coils, defrost controls and refrigerant charge all drift over time, and small losses in efficiency accumulate quietly.
HVAC repair when your system isn’t working properly
Most people do not call an HVAC contractor with a diagnosis. They call with a symptom — a noise, a room that will not warm up, a bill that jumped. The symptoms below are the ones we are asked about most often in Philadelphia, with a short explanation of what they usually mean. None of them are things to open a panel and investigate yourself: heating and cooling equipment combines high voltage, gas and pressurised refrigerant, and all three punish improvisation.
AC not cooling
The unit runs, air moves, but the room never reaches the setting. Causes range from a dirty filter or coil to low refrigerant, a failing compressor or a miscalibrated thermostat. A technician measures temperature split and pressures to tell which it is rather than guessing.
Furnace not heating
The blower runs but the air stays cool, or nothing happens at all. Igniters, flame sensors, limit switches and gas supply faults are the usual suspects. Repeated ignition failures put the unit into lockout, which is a protection, not a breakdown.
Poor airflow
Weak air at the registers makes every other part of the system work harder. Start with the filter, then look at blower condition, duct leakage, collapsed flex duct and closed dampers. Persistent low airflow can freeze a coil in summer and overheat a furnace in winter.
Strange HVAC noises
Sound is useful information. Squealing usually implicates a belt or motor bearing, grinding a failing bearing, clicking a relay or control, banging delayed ignition or duct expansion. A new noise is worth a call before it becomes a new failure.
Water leaks
Water near an indoor unit is most often a blocked condensate drain or a full drain pan, but it can also be a frozen evaporator coil thawing out. Left alone it damages ceilings, floors and the equipment itself, so it is worth acting on quickly.
Frequent cycling
Starting and stopping every few minutes wastes energy and wears components faster than continuous running. It can indicate a control or sensor fault, restricted airflow, or equipment that was oversized for the space when it was installed.
Thermostat problems
A blank screen, a reading that does not match the room, or a schedule that ignores itself. Sometimes it is batteries or wiring; sometimes the thermostat is fine and the fault is in the equipment it is trying to command. Both are worth checking before replacing anything.
Uneven temperatures
One floor comfortable, another not. In multi-storey Philadelphia homes this is often distribution rather than equipment — duct sizing, damper position, return air paths, insulation. The fix may be zoning or duct work rather than a new system.
HVAC installation & replacement in Philadelphia
Replacing heating or cooling equipment is a decision most people make two or three times in their life, which is why it deserves a proper conversation rather than a quote sheet. We install new systems in properties that are being renovated or extended, and we replace equipment that has reached the end of its working life.
The process starts with the property, not the catalogue. We look at the size and layout of the space, the condition and capacity of the existing ductwork, the fuel and electrical service available, how the building holds heat, and how the space is actually used — a top floor that bakes in August and a basement office that never warms up are both sizing problems before they are equipment problems. Sizing done properly is the difference between a system that runs steadily and one that blasts, shuts off and leaves the air damp.
When you are deciding between repairing and replacing, the factors worth weighing are the system’s overall condition, its age relative to typical service life, how often it has needed attention lately, the efficiency of what you have compared with what is currently available, whether the comfort problems you are living with are actually fixable on the existing equipment, and any constraints the property imposes — clearances, venting routes, electrical capacity, and in older Philadelphia housing stock, simply where the equipment can physically go.
We will not promise a specific dollar figure in savings, because that depends on your usage, your rates and your building. What we will do is explain what each option changes in practical terms and let you weigh it.
Installation day itself is straightforward: removal and disposal of the old equipment, fitting and connection of the new system, commissioning and testing under real operating conditions, and then a walkthrough so you know how to run it, how to change the filter and what to watch for. Reviewers have consistently mentioned that our crews clear away packaging and debris before leaving.
Keep your HVAC system ready for every season
Maintenance is the least visible service we offer and the one that changes the most. A system that is inspected twice a year — cooling in spring, heating in autumn — spends the year running on components that are known to be working, rather than components nobody has looked at since installation.
A maintenance visit is an inspection with measurements, not a wipe-down. Depending on the equipment it covers the overall condition of the system, filter condition and fit, airflow at the unit and at the registers, electrical components and connections including capacitors and contactors, thermostat operation and calibration, the outdoor unit and its coil and clearances, condensate drainage, safety controls, and system performance compared with what the equipment should be producing. On heating equipment it also covers the burner, igniter and flue; on cooling and heat pump equipment, refrigerant charge and coil condition.
What this buys you is mostly the absence of events. Problems get identified while they are still small and cheap, the system keeps performing closer to its rated output, comfort stays consistent instead of drifting downward over a season, and the odds of an unexpected service call on the worst day of the year go down. We will not claim a specific number of extra years from your equipment — nobody honestly can — but neglected systems fail earlier and more expensively than maintained ones, and that much is not controversial.
We maintain air conditioning, furnaces, heat pumps, boilers and ductless systems. If you have never had a system serviced, the first visit is also a useful baseline: you find out what condition the equipment is actually in, which is worth knowing before the season it has to work hardest.
Indoor air quality solutions
Indoor air quality equipment works alongside your heating and cooling system rather than replacing any part of it. We fit and service air filtration, air purification, humidifiers and dehumidifiers, and ventilation improvements, and we check the ductwork and airflow that everything else depends on.
The concerns people raise are practical ones. Dust that returns two days after cleaning, often a filtration or duct leakage issue. Odours that linger between rooms, usually a ventilation and airflow question. Excess humidity in summer, which makes a house feel warmer than the thermostat says and encourages mould in basements — a common complaint in older Philadelphia properties. Dry air in winter that causes static and cracked woodwork, which whole-home humidification addresses more evenly than portable units. And rooms that simply feel stuffy, which is usually a ventilation and return-air problem.
We describe what each piece of equipment does and what it does not do. We do not make medical or health claims about air quality products, and you should be cautious of anyone who does. What we can tell you is how a given filter, humidifier or ventilation change affects the air in your building and what it will cost to run.
HVAC help when you need it
Some HVAC problems can wait for a convenient appointment. Others cannot. A complete loss of heating in the middle of a Philadelphia cold snap is a genuine problem for a household, particularly one with small children, elderly residents or anyone whose health depends on a stable indoor temperature. A complete loss of cooling during a summer heat wave is the same situation in reverse.
Our hours are longer than a standard trade schedule for exactly this reason: Monday to Saturday from 7 AM to 8 PM, and Sunday from 8 AM to 8 PM. That covers early mornings, evenings and both weekend days, which is when most systems seem to decide they have had enough. Call and describe what has happened and we will tell you honestly what we can do and when.
Situations worth calling about without waiting include no heat or no cooling at all, a system that trips a breaker every time it starts, burning smells from the equipment, water actively leaking near a unit, and any unfamiliar mechanical noise that started suddenly. If you smell gas, do not troubleshoot — leave the property and call the gas utility first, then call us.
Please do not attempt repairs on gas connections, sealed electrical components or anything involving refrigerant. Turning the system off at the thermostat or the breaker is a reasonable first step; going further is not.
Residential HVAC services in Philadelphia
Homes are the bulk of our work, and Philadelphia housing makes that interesting. A narrow three-storey row home heats and cools nothing like a detached property in the Northeast, and a converted apartment building behaves differently again. We work on all of it.
For homes we handle air conditioning, furnaces, boilers, heat pumps, ductless mini-splits, ductwork, thermostats and seasonal maintenance — repair, installation, replacement and servicing across every one of those. If your house has a mix of systems, which is common in properties that have been extended or converted, we can look at the whole thing rather than only the piece that is currently complaining.
The point of all of it is straightforward: a home that stays comfortable through the swing from a humid August to a cold February without you having to think about it. That means equipment sized for the space, distribution that reaches every room, controls that do what you set them to do, and servicing that catches problems before they become emergencies. When something does go wrong, it means a technician who explains the fault and the options clearly enough that you can make the call yourself.
Commercial HVAC services in Philadelphia
We provide heating, ventilation and air conditioning services for commercial properties as well as homes. Commercial work has a different centre of gravity: the equipment is usually larger, the consequences of downtime are measured in lost trading hours or unhappy tenants, and the person calling is often a manager coordinating around a business that has to keep running.
Our commercial services cover repair and diagnostics, installation of new systems, replacement of equipment at the end of its life, and preventive maintenance programmes for both heating and cooling. Preventive maintenance is where commercial properties see the clearest return, because scheduled visits during quiet hours are considerably less disruptive and less expensive than an emergency call during business hours.
We work with offices, retail units, restaurants, commercial buildings and multi-unit residential properties. Before quoting anything we look at the equipment you actually have and how the building is used, because a restaurant kitchen and an open-plan office place completely different demands on a system even when the tonnage looks similar on paper.
Why choose P & J HVAC Philadelphia?
No invented awards or badges. Here is what the company actually offers.
A Philadelphia company
We are based at 1132 Market Street in Center City and work across the city and surrounding metro area. Local means local — we know the housing stock and the systems in it.
Both seasons, one contractor
Air conditioning, furnaces, boilers, heat pumps and mini-splits. You do not need a different company in June than you needed in December.
Explained in plain language
Customers have specifically noted that our technicians describe systems in terms they can follow rather than technical shorthand. You should understand what you are approving.
Repair and replacement options
Where a system can reasonably be repaired, we say so. Where replacement makes more sense, we explain why and let you compare the two on the numbers.
Easy to reach
Call (215) 330-2456 or submit a service request online. Open seven days a week, including evenings until 8 PM.
Clean work sites
Reviewers repeatedly mention that our crews take away packaging and debris at the end of a job. It is a small thing that says a lot about how work gets done.
Our simple HVAC service process
Six steps from your first call to a finished job.
Contact P & J HVAC
Call (215) 330-2456 or submit a service request online, whichever suits you.
Tell us about the problem
Describe what the system is doing — the noise, the temperature, when it started. Detail helps us send the right technician with the right parts.
Schedule the visit
We agree a time that works, including evenings and weekends within our operating hours.
Inspect the system
The technician inspects and tests the equipment to establish the actual cause rather than the most obvious symptom.
Explain the options
You get a plain explanation of the fault and the realistic ways to address it, with the trade-offs of each.
Complete the work
The approved repair, maintenance or installation is carried out, tested, and the site is cleaned up before we leave.
Serving Philadelphia, PA
P & J HVAC Philadelphia serves Philadelphia and the surrounding metro area from our address at 1132 Market Street in Center City. Publicly listed coverage includes Center City, Fishtown and Manayunk along with neighbouring areas of the city.
Being genuinely based in the city rather than covering it from a suburban depot changes the practical experience of a service call. Travel time is shorter, scheduling is more flexible, and there is no awkward conversation about whether your neighbourhood falls inside a service radius. It also means we work on Philadelphia buildings constantly — the narrow row homes with equipment squeezed into basements and rear yards, the converted industrial buildings around Fishtown, the mixed old-and-new stock in Manayunk, and the apartment and office buildings in Center City where roof access and shared systems complicate everything.
If you are outside the neighbourhoods listed above but still within the Philadelphia area, call and ask. Coverage is easier to confirm in thirty seconds on the phone than to guess from a map, and we would rather tell you honestly whether we can help than have you wait for a visit that was never going to happen.
Whichever part of the city you are in, the service is the same: inspect the system properly, explain what is going on, and carry out the work you approve.
Neighbourhood list is indicative of the Philadelphia metro area we cover — call to confirm your specific address.
HVAC services designed for Philadelphia properties
Philadelphia asks a lot of heating and cooling equipment. The year runs from humid summers where the cooling load is as much about moisture as temperature, to winters cold enough that a heating failure becomes urgent within hours. Both ends of that range are demanding, and the shoulder seasons in spring and autumn — where a system may be asked to heat overnight and cool the same afternoon — are where control and sizing problems show up first.
The building stock complicates it further. A large share of the city’s homes were built long before central air conditioning existed. Many were heated by boilers and radiators and still are. Others had ductwork retrofitted decades later, sometimes generously and sometimes into whatever cavity happened to be available. Newer construction and gut renovations bring high-efficiency furnaces, heat pumps and zoned systems into the same streets. A contractor working in this city has to be comfortable moving between all of them in a single day.
That is also why ductless mini-splits have become so common here. In a property where running new ducts would mean losing ceiling height or tearing into finished walls, a mini-split adds heating and cooling to a specific room without that disruption — a third-floor bedroom that was always too hot, a converted basement, a rear extension. They are not the answer to everything, but they solve a problem this city’s housing creates constantly.
The practical implication is that maintenance timing matters more here than in a milder climate. Cooling equipment should be checked in spring, before the first stretch of humid weather. Heating equipment should be checked in autumn, before the first cold night. Systems that do both — heat pumps especially — benefit from being looked at twice, because they never get a genuine off-season to rest.
What customers say about P & J HVAC Philadelphia
P & J HVAC Philadelphia holds a 5.0 rating across published customer reviews. Connect a Google Reviews plugin to this section to display live verified reviews.
A reviewer describes a maintenance visit covering both of their air conditioning units, during which a dead thermostat and failed dual capacitors on the compressor were replaced. They were pleased with the work.
Published Google reviewReviews shown are summarised from published listings. No review content on this site is fabricated.
Frequently asked questions about HVAC services
What HVAC services does P & J HVAC Philadelphia provide?
Do you provide AC repair in Philadelphia?
Do you provide heating repair?
How often should an HVAC system be maintained?
How do I know if my AC needs repair?
When should I replace my HVAC system?
Why is my furnace blowing cold air?
Why is my AC running but not cooling?
Do you service heat pumps?
Do you provide HVAC maintenance?
Do you service commercial HVAC systems?
Which areas of Philadelphia do you serve?
How can I request HVAC service?
Can I request service online?
What are your hours?
How do I contact P & J HVAC Philadelphia?
Need HVAC service in Philadelphia?
If your air conditioning has stopped cooling, your furnace will not fire, a room never gets comfortable, or a system is old enough that replacement is worth a conversation, get in touch. Tell us what the equipment is doing and we will arrange a visit, inspect it properly, and explain what we find before any work goes ahead. We are open seven days a week, until 8 PM every evening, from our Center City address at 1132 Market Street. Whether it is a single repair, a seasonal tune-up or a full system replacement, the first step is the same — a call or a service request.
Get started with P & J HVAC Philadelphia
Heating, cooling, repair, installation or maintenance — for a home or a commercial property anywhere in Philadelphia. Call us or send a service request and we will take it from there.
1132 Market St, Philadelphia, PA 19107 · Mon–Sat 7 AM–8 PM · Sun 8 AM–8 PM
